Select Vehicle
Select Vehicle
Build Your Custom Kit
Start Building Below
Build Your Custom Kit
Create a made-to-order hardware kit by section. Add each area of your build, select the hardware type, style, quantity, finish, and notes, then review your kit before adding it to cart.
Build flow
Create the section, add hardware rows, then review your kit.
Required before production.
Add hardware rows, pick finishes, and review exact variants.
0 Sections • 0 Items • $0.00

Before You Start

For the best results, remove and measure your original hardware before building your kit.

  • Group your hardware by section, such as valve cover, coil packs, fenders, headlights, brackets, or widebody panels.
  • Keep different bolt lengths, head styles, or washer styles in separate rows.
  • Confirm the thread diameter, thread pitch, and thread length before selecting your hardware.
  • Use the notes field for washers, spacers, brackets, tight-clearance areas, or anything unusual.

How The Kit Builder Works

Build your kit one section at a time.

Create a section, choose the hardware type and style, enter your quantity, select your finish, and add any notes needed for that area of the vehicle. The Kit Builder will load the matching JDC product and real variant options so you can build a custom hardware setup around your exact project.

Choose Your Finish

Select your preferred JDC titanium finish while building your kit. You can choose finishes per hardware row, which makes it easy to keep the kit uniform or mix finishes between different sections of the build.

Important Kit Builder Notes

  • The Kit Builder is designed for made-to-order hardware kits based on the information you provide.
  • Accurate measurements are important. A small difference in thread pitch or length can affect fitment.
  • If you are unsure about a bolt, leave a note with as much detail as possible.
  • Double-check every section before completing your kit.