Select Vehicle
Select Vehicle
AEM's legendary Digital Wideband O2 AFR UEGO Gauge is a wideband UEGO air/fuel ratio controller (AFR) and gauge in one. It unites accuracy, speed and control with an easy to read, digital LED display and sweeping LED "needle" that changes colors as AFR changes from rich to lean. NOTE: The 30-4100 Wideband UEGO Gauge Controller that uses the 4.2 LSU sensor will be superseded to the 30-4110 Wideband UEGO Gauge Controller that uses the 4.9 LSU sensor in August 2014. Instructions for the 30-4100 will still be available in the Instructions tab after this change. WHAT IS A WIDEBAND UEGO AIR/FUEL CONTROLLER? AEM's Wideband UEGO (Universal Exhaust Gas Oxygen, pronounced "You-Way-Go") Controllers are powerful, cost-effective tuning tools that allow users to accurately monitor the Air/Fuel Ratio (AFR) of their engine. WHY USE A WIDEBAND AIR/FUEL CONTROLLER? Accurate AFR data is critical when tuning an engine. Running rich (very low air/fuel ratio, excessive fuel) can cause a loss in power, while running too lean (very high air/fuel ratio, not enough fuel) may result in serious engine damage. Using a wideband air/fuel controller during the tuning process allows you to monitor AFR and adjust tuning parameters to optimize them for maximum power and efficiency. AEM has a comprehensive line of highly accurate, reliable wideband air/fuel controllers that can help ensure your vehicle is optimally tuned. WHAT IS FREE-AIR CALIBRATION? Some of our competitors require that you frequently perform a free-air calibration procedure to calibrate their O2 sensors. This process involves removing the sensor from the bung while still connected to the controller device, then waving the sensor in the air so it can read atmospheric O2 levels. We use 4.9 LSU sensors in our wideband controllers. Our sensors are individually laboratory-calibrated and never require free air calibration!
Warranty
Installation Instructions

New Unused Product Returns:

Your complete satisfaction is our priority. If an item purchased from aemelectronics.com does not meet your expectations, it may be eligible for return.

  • You may return new, unused parts within 90 days from the purchase date for a complete refund or exchange. To avoid a restocking fee, you must request a return within 60 days of purchase date, and AEM must receive the returned items within 90 days after purchase date.
  • Parts not eligible for return: Clearance items, Factory Refurbished Items, and Made to Order items.
  • Items returned 91-180 days after the date of purchase will be subject to a 15% restocking fee
  • Items are not eligible for return after 180 days unless there is a valid warranty issue and submission. The product must be in the original, manufacturer's box and must be sent freight prepaid
  • Products that show signs of excessive age, abuse, improper handling, or have been modified beyond AEM’s instructions may be rejected and incur an inspection fee regardless of age
  • Original shipping charges are non-refundable

AEM Performance Electronics Limited Warranty

AEM Performance Electronics (“AEM Electronics”) warrants to the original consumer that all AEM Electronics Products will be free from defects in material and workmanship under normal and proper use for a period of 90 days from the date of the original purchase.

For purposes of illustration, but not limitation, the following are not defects in material or workmanship: (a) normal wear and tear and/or required maintenance; (b) improper handling, storage, installation, lubrication or maintenance; (c) damage resulting from or related to misuse (including use in a way other than those applications recommended by AEM), abuse, unauthorized modification or alteration, incorrect polarity (+&- wires crossed), accident, acts of God, or external causes; and (d) cosmetic damage (nicks, bruising, discoloration).

EXCEPT WHERE PROHIBITED BY LAW, THIS WARRANTY IS EXCLUSIVE AND THE ONLY WARRANTY APPLICABLE TO THE PRODUCT. IT IS OFFERED EXPRESSLY IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH ARE DISCLAIMED.

Limited Remedies: If a Product fails because of a defect in material and/or workmanship within this limited warranty period, AEM will repair or replace the Product at no cost to the customer. This warranty is limited to the repair or replacement of the AEM Electronics Product. In the event of a defect, to the extent permitted by law, these are the customer's sole and exclusive remedies.

Incidental and Consequential Damage Disclaimer: EXCEPT WHERE PROHIBITED BY LAW, AEM ELECTRONICS DISCLAIMS AND UNDER NO CIRCUMSTANCES SHALL BE LIABLE FOR SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR LOSSES RESULTING FROM THE USE, MISUSE, OR INABILITY TO USE THE PRODUCT AS WELL AS ANY BREACHES OF THIS WARRANTY OR ANY IMPLIED WARRANTY REGARDLESS OF THE CAUSE AND EVEN IF THE CLAIMED DAMAGES OR LOSSES WERE CAUSED BY A WARRANTABLE DEFECT.


This warranty applies only to the original purchaser of the Product and is non-transferable, except as prohibited by applicable law.


In no event shall this warranty exceed the original purchase price of the AEM Electronics Product.


Warranty returns will only be accepted by AEM Electronics when accompanied by a valid Return Merchandise Authorization (RMA) number and a dated proof of purchase.


Please note that before AEM Electronics can issue an RMA for any Product, it is first necessary for the installer or end-user to contact our technical support team to discuss the problem. Most issues can be resolved over the phone. Under no circumstances should a Product be returned, or an RMA requested before our support team is contacted. This will ensure that if an RMA is needed that our team is able to track your Product through the warranty process.


PRODUCTS OUTSIDE OF WARRANTY PERIOD

Most AEM Electronics Products, excluding discontinued products, can be replaced (at a discounted rate) following documentation of the faulted item being field destroyed. A valid Return Merchandise Authorization (RMA) number must be issued by the Support Team before a transaction for Product replacement can occur.

AEM Logo

AEM

**AEM (Advanced Engine Management)** is a premier brand specializing in high-performance automotive parts and electronics. Known for innovation and quality, AEM offers a wide range of products, including air intake systems, fuel management systems, and engine tuning solutions. Designed to enhance performance and reliability, AEM products are trusted by enthusiasts and racers worldwide for pushing the limits of what's possible on the street or track.

View More AEM Products