JDC Titanium Steering Wheel Overlay (Evo 7/8/9)

(Gloves are recommended during installation to keep fingerprints off the titanium overlay.)

1. Remove the three black plastic clips from the spokes. These clips may have some glue holding them on if they've never been removed, but should still be easy to remove by hand.
2. Tape around the center ring so the face of the wheel doesn't get scratched when you pry off the center ring.
3. Use a pry tool or a flathead screwdriver to carefully pry the center ring off. There are three plastic clips that hold the ring on the wheel.
4. Place the titanium overlay on the wheel and line up each hole with the holes in the steering wheel. (No adhesive is required to hold the overlay in place since the three clips and center ring will hold it securely to the wheel.)
5. Put the plastic clips back into their place. (For a more permanent solution use glue to secure the clips back in place.)
6. Carefully line the center ring up with the three tabs and press it back into place.
7. If the part gets fingerprints on it during installation, Windex or a Clorox wipe works great to clean it up. 
8. Enjoy your new custom-looking steering wheel!