Street Hunter BRZ/GR86 リア Trunk Spoiler

All products require professional installation. Minor adjustments might be necessary. These are normal body work and installation steps. Therefore, it is NOT considered to be defective. Pictures and video are required to demonstrate true defects on
products prior to return. In the event such parts prove defective following their purchase and installation, the buyer assumes the
entire value of any cost related to installation, repair, or replacement. StreetHunter Designs will not be held liable for anything other than the replacement of said defective part and will not incur any other costs.
StreetHunter Designs is not responsible for any damage incurred after installation or modification. This includes environmental damage such as rust, oxidation, and fading and/or yellowing of carbon fiber products.

Our carbon fiber products are laid by hand, and small imperfections such as wavy weaves, small bubbles, and clear coat finish
blemishes are inevitable. Imperfections in StreetHunter Designs Carbon Fiber products that qualify as a defect are defined as:

Clear Coat bubble:

• Heavy cloudiness is visible under direct, natural sunlight, which clearly affects the appearance of the part.

Carbon Imperfections or Minor Scratches larger than 1/2" in diameter
Chips and Damage:

• Structural damage to the product, damaged corners of parts, and delamination are covered by our defect policy.

Clear Coat Disclaimer:

• Our Carbon Fiber products come with an automotive clear coat from our mold; however, in order to achieve a finish with the guarantee of zero carbon imperfections, we strongly suggest taking it to a professional shop to be sprayed.
  The product is delivered in raw, manufactured condition. The purchaser or their shop will have to prep, sand, prime, paint, and custom-fit the product to the target vehicle. The target vehicle may have to be cut, welded, and sealed for purchased products to function properly.