Select Vehicle
Select Vehicle

Seibon OEMスタイルカーボンファイバーグリル

SEIBON カーボンファイバー トランクとハッチは、工場出荷時のトランクまたはハッチの交換用に設計されており、すべてのヒンジ、ハンドル、ガラス、ロックを 100% ボルトオンで取り付けることができます。SEIBON カーボンファイバー トランクとハッチでスタイリッシュに重量を削減します。

OEM スタイルにより、SEIBON カーボン ファイバー トランクが工場出荷時の外観とまったく同じになります。追加のフィン、ダクト、またはストックの外観からの変更はありません。

オプション:

  • 三菱ダイヤモンドエンブレム
  • 剃られたエンブレム(ウィル MRモデルには適合しません)

特徴:

  • ハンドレイド
  • 「ウェット」カーボンファイバー
  • 工場から透明な「ゲル」コーティング済み
  • 出荷前に検査済み

用途:

  • 08-15 エボX

配送:

  • この商品は送料無料の対象外です。チェックアウト時に送料が追加されます。
  • ご注文がスムーズに進むよう、受け取り手順に関する以下の短いビデオをご覧ください。 

Seibon の受信手順 ( 35mm Cinemaより) - Vimeoより。

 

Shipping:

  • This product does not qualify for free shipping. Shipping will be added at checkout.  

Please watch the short video below on receiving procedures to make sure your order goes smoothly!  

Seibon Receiving Procedures

  • If the freight carrier refuses to let you inspect the packages, please inspect and report any damage ASAP, per the included packet from Seibon

Items sold by Seibon International, Inc. may not be legal for street use in all states. It is the buyer’s responsibility to comply with applicable state laws. Buyer understands that due to strict U.S. Federal and State safety crash guidelines, Seibon is not responsible or liable for any damages or possible injuries incurred upon possible accidents due to driver error, incorrect installations, bad judgment, or act of nature/God, Allah, Jehovah, etc.

All products are intended for off-highway uses only, and should be used for their intended purposes only. Seibon does not take responsibility over buyer installation, modification, and unusual stress of the products. The buyer assumes all responsibilities for determining the suitability of the products. Seibon is not responsible for any damages incurred either directly or indirectly on the vehicles or operators/passengers within the vehicles.

Customers in countries/regions listed below should purchase Seibon products from the Exclusive Distributor in that region (click to find Dealer Contact Info). Purchases made through non-official channels do not qualify for warranties.

  • Australia
  • China
  • Japan
  • New Zealand
  • Taiwan
  • United Kingdom

Seibon Fitment Guarantee

The following situations are fully covered under the Seibon Fitment Guarantee:

Hoods:

  • Hood does not clear a stock engine
  • Gap between the hood and the fenders are more than 1/2" wide on each side
  • Hood levels more than 1/4" higher or lower than the fenders
  • Latch is 1/16" too long or too short than the stock latch, causing the hood not to latch
  • Please note that Seibon Carbon does not suggest re-installing gas hood shocks/dampers/struts.
  • Seibon does not guarantee fitment on cars that have been in involved in accidents and/or had body damages.
  • Seibon strongly recommends the use of heat shields. Damages to the hood that results from the absence of heat shields will not be covered under warranty.

Trunks:

  • Gap between the trunk and the rear fenders are more than 1/2" wide on each side
  • Trunk levels more than 1/4" higher or lower than the rear fenders.
  • Please note that Seibon Carbon does not suggest re-installing gas trunk shocks/dampers/struts.
  • Seibon does not guarantee fitment on cars that have been in involved in accidents and/or had body damages.

Lips:

  • Length of the lip is 3/8" too long or too short than the stock bumper

 

Seibon Appearance Guarantee

The following situations are fully covered under the Seibon Appearance Guarantee: (Note that all Seibon carbon fiber products are hand-made, and small imperfections are inevitable. Claims guilty of abusing Seibon's claims program will be denied immediately)

  • Heavy cloudiness under the clear coat (which is only visible under the sun. Seibon apologizes for not being able to QC every product under natural sun light)
  • Clear coat bubble larger than 3/8" in diameter

 

Seibon Clear Coat Guarantee

The following situations are fully covered under the Seibon Clear Coat Guarantee:

  • Clear coat changes color more than a full shade within 6 months (Note: like car paint, slight fading and discoloration is natural. The warranty only covers more extreme cases.)

Hood Pins

All hoods require hood pins for safety reasons. Seibon will not be liable for any damages to the product and the vehicle caused by not properly using hood pins.

Seibon Logo

セイボン

Seibon Carbon is a premium manufacturer of high-quality carbon fiber automotive components. Known for their lightweight design, durability, and superior craftsmanship, Seibon offers a wide range of products, including hoods, trunks, fenders, and aerodynamic accessories. Trusted by enthusiasts and professionals alike, Seibon combines sleek aesthetics with performance enhancements, making it a top choice for those seeking both style and functionality.

セイボンの商品をもっと見る