JDC Titanium Plastic Rivet Replacement Hardware
The JDC titanium plastic rivet replacement hardware is the perfect solution for anyone that's tired of breaking those cheap plastic clips every time you have to take them out!
Note: Installation of both the stainless steel rivnut and rubber well nut may require drilling the hole a little bigger to get the proper clearance.
M5 sizes can be found here
Stainless Steel Rivet Nut vs Rubber Well Nut
- Stainless Steel Rivet Nuts are better for metal parts, such as fenders.
- Rubber Well Nuts work better in softer pieces, such as carbon fiber, FRP, polyurethane, and plastic.
How do they work?
- Each plastic rivet is replaced with a stainless steel rivet nut or rubber well nut that adds threads to the hole for your bolt. Once you have the rivet nut installed (rivnut tool sold separately), you can simply screw the titanium bolt and washer in place. It's that simple! This kit can be used anywhere where a plastic rivet was once used. We have multiple bolt lengths and washer sizes to work on any application!
Features:
- Our Flush-Fit washers incorporate a small lip that gives the flange head of the bolt a flush appearance once installed.
- Easy to install (rivnut tool sold separately)
- Made to last a lifetime (with proper care)
What size will I need?
- Most common plastic rivets will use an M6 size hole with a 17mm long bolt, but it will vary depending on the application. That's why we offer the following sizes for you to choose from:
What's in the box?
Each piece is sold individually and comes with:
- (1) Bolt of your choice
- (1) Washer of your choice
- (1) Stainless Steel Rivnut or Rubber Well nut
About our titanium hardware:
- All of our hardware is made from Ti6Al-4V (Grade 5) titanium.
- Each piece is hand polished before receiving our proprietary cold anodizing treatment for colors that will last a lifetime!
Installation Notes:
-
M6 Metal Rivnuts require a 3/8" hole for installation. You will need a rivnut tool to fasten these in place. You can order an inexpensive tool here, or order a bigger one online to make the job easier.
-
M6 Rubber Well Nuts require a 1/2" hole for installation. No tool is needed to fasten these in place. The rubber will squeeze out as you tighten the bolt to make it secure in its location.
Shipping Times:
-
All JDC titanium products are made to order unless otherwise stated on the item listing. Please see the red banner at the top of the website for the current estimated turnaround time. Production time can vary depending on your order size, products ordered, and the difficulty of custom options requested.
