GrimmSpeed Chase JB400 Turbocharger
The GrimmSpeed Turbocharger Program started by recognizing a need in the market for a robust, quick-spooling, and high-performing turbo. Design began from the ground up and took over 3 years of hard work, testing, and development to introduce a product that we're proud to have carry The GrimmSpeed Name. The focus of this project was to offer a stock location OE replacement turbo, which when paired with GrimmSpeed supporting mods, allows enthusiasts to take full advantage of their EJ series turbo engine.
Both of our new turbocharger options feature state-of-the-art proprietary compressors, turbines, CHRA's, and wheel designs which maximize the power made on your EJ engine at two different price points. The overall design went through tedious gas flow test analysis, strenuous failure testing, and engine pounding dyno/road testing, all to create the new standard for EJ engines: The GrimmSpeed Chase JB400 and Overtake BB500 Turbochargers!
The Chase JB400 Turbo is the smaller of our two offerings, however packs a big punch. This journal bearing unit is a perfect bolt-on to any stage 3 car, with which you are able to maximize the engine's power potential with instant results through installation/tuning. The Chase JB400 features a robust 49lb compressor wheel, with a 53mm turbine wheel to offer quick response and power in the mid-range where you need it. The Chase Version was able to hit 440WHP and 460WTQ on The GrimmSpeed Stage 3-equipped 2020 STI with the addition of only tuning and fuel mods. The impressive bit is that the vehicle was able to hold over 400WTQ from 4150RPM, an RPM range where the stock turbo begins to lose power. Compared to a tuned stock turbo STI, the Chase 400 was able to produce 70 more horsepower and 66 more ft/lbs of torque [with room for more with additional mods!]
Features
- Compressor Wheel Size (Inducer/Exducer): 51.2mm / 73.8mm Extended tip, 48 Trim
- Turbine Wheel Size (Inducer/Exducer): 53.8mm / 47mm, 76 Trim
- Compressor Flow: 49 lb-min
- Compressor Wheel Type Material/Alloy: Billet 2618
- Compressor Housing Alloy: A356
- Turbine Housing Alloy: D5S
- Bearing Type: Journal
- Compressor A/R: 0.65
- Turbine A/R: 0.88
- Adjustable Wastegate: Pre-set at 15Psi base pressure
- KIT INCLUDES GASKETS, OIL/COOLANT LINES, AND FITTINGS
Benefits
- Increased Power and Performance
Please Note: This turbocharger has not been tested on all trim levels and it may require some additional modifications to be installed.
Applications
- 2004-2021 Subaru WRX STI
- 2002-2014 Subaru WRX
What's In The Box?
- 1 - Turbocharger
- All Necessary Gaskets, Lines, and Fittings
Warranty
- GrimmSpeed's Limited Manufacturer's Warranty
